Other

VDO Gauge Mounting Cup Kit

• Inside Diameter: 2 1⁄16" (52mm)
• Included: Mounting hardware

VDO Generator Sender

• For Speedometer & Tachometer without Odometer
• Thread: M22 x 1.5
• Electrical connection: 2-pole or 3-pole, Insulated Return
• Driving torque: 500 pcm max.
• Rotational speed: 3000 min-1 max.
• No-load voltage: 19.3 V at 2000 min-1
• Voltage tolerance: ±1 % at nominal value at +20° C
• Operating temperature: -25° C to +90° C

VDO 4 Pulse Generator Sender

• For Speedometer & Tachometer with Odometer
• 4 Pulse
• Thread: M22 x 1.5
• Required Accessories: (sold separately)
  • 340-060 Drive Key
  • 340-061 Drive Key
  • 340-062 Drive Key

VDO Sender, Generator, for Speedometer & Tachometer with Odometer

• Thread: 7⁄8" - 18 NPT

VDO Speedometer​ RPM Sensor / Sender

• Application: GM & Chrysler (with threaded transmission sender)
• For Electronic, Programmable Speedometers
• Voltage: 12V
• Connection: Unterminated Wire Lead
• Thread Size: 7⁄8" - 18 NPT
• Number of Pulses: 16 Pulses per Revolution (PPR)
• Aluminum body
• Standard Hall Effect

VDO Ford Speedometer Sender 

• Application: Electronic, programmable speedometers
• Type: Hall Effect
• Pulses: 16
• Designed for most Ford transmissions with plug-in style speedometer cable output. Not designed for O.E.M. speedometers.
• Connection: Unterminated Wire Lead

VDO Speedometer Sender

• Application: For Ford Electronic, Programmable Speedometers
• Plug-in
• Through Drive (for Cruise Control)
• Hall Effect with 16 Pulse
• Thread: 7⁄8" - 18 NPT

VDO Sender

• Applications: For VDO Electronic and Programmable Speedometers and Tachometers
• Magnetic Pick-up
• Length: 2 inches
• Thread: 3/4" - 16

VDO: GENERATOR SENDER, BLOCKING OSCILLATOR TYPE, 90MM LONG, 8-15V, M18X1.5

Special Order- requires additional lead time

VDO Tachometer/Speedometer Sender

• Sender type: Blocking Oscillator - 400Hz
• Length: 63mm
• Thread: M18 x 1.5 Male
• Power supply: 8 - 15V Stabilized
• Sensor signal: 2-pole insulated return
• Connector: Bayonet 4-pole 2.8mm
• For use with VDO speedometers and tachometers designated as generator-type (4 pulses per revolution)

VDO: GENERATOR SENDER, BLOCKING OSCILLATOR TYPE, 25MM LONG, 8-15V, M18X1.5

Special Order- requires additional lead time

VDO: GENERATOR SENDER, BLOCKING OSCILLATOR TYPE, 90MM LONG, 5-30V, M18X1.5

Special Order- requires additional lead time

VDO GPS Speed Sender

• Adds GPS Accuracy to VDO Electronic Speedometers
• Green, Orange, Red status LED
• 6ft (2m) shielded cable (unterminated)
• Compatible with all current and previous VDO electronic speedometers, as well as some non-VDO speedometers
• Low current draw, less than 10mA (at 12 volts)
• Voltage: 12V

Click Here for installation instructions

VDO Inductive Tachometer / Speedometer Sender

• Sender type: Inductive - 250Hz
• Thread: M18 x 1.5
• Resistance: 1.050 ± 100 Ohm
• Sensor signal: 2-pole insulated return
• Connector: Kostal 2-pole pin 4mm

  When NOT in stock, our normal lead time is 4 - 6 weeks  

VDO Inductive Sender

• Sender type: Inductive - 250Hz
• Application: Tachometer - Speedometer
• Thread: M18 x 1.5
• Length: 71.4mm
• Resistance:  100Ω ± 1.050
• Sensor signal: 2-pole insulated return
• Connector: Kostal 2-pole pin 4mm

VDO Inductive Sender

• Sender type: Inductive - 250Hz
• Application: For inductive and programmable speedometers and tachometers
• Length: 28.5mm
• Thread: M18 x 1.5
• Resistance: 1.050 ± 100 Ohm
• Sensor signal: 2-pole insulated return
• Connector: 2 Spades 6.3 x 0.8mm

VDO Tachometer/Speedometer Sender

• Sender type: Inductive - 250Hz
• Thread: M18 x 1.5
• Length: 34mm
• Resistance: 1.050 ± 100Ω
• Sensor signal: 2-pole insulated return
• Connector: 2 Spades 6.3x0.8mm
• For inductive and programmable speedometers and tachometers

VDO Inductive Sender

• Sender type: Inductive - 250Hz
• Thread: 3⁄4" -16 UNF-2A
• Resistance: 1.050Ω ± 100Ω
• Sensor signal: 2-pole insulated return
• Length: 34mm (1 1⁄3")
• Connector: 2x Spades (6.3 x 0.8mm)

VDO Inductive Sender

• Sender type: Inductive - 250Hz
• Length: 34mm
• Thread: M18 x 1.5
• Resistance: 1.050 ± 100 Ohm
• Sensor signal: 2-pole insulated return
• Connector: (2) Blades 6.3 x 0.8mm

VDO Inductive Tachometer/Speedometer Sender

• Sender type: Inductive - 250Hz
• Thread: M18 x 1.5
• Length: 70.7mm
• Resistance: 1.050 ± 100Ω
• Sensor signal: 2-pole insulated return
• Connector: 2 Spades 6.3mm & 4.8mm
• For inductive and programmable speedometers and tachometers

VDO Inductive Sender

• Length: 25mm
• Sender type: Inductive - 250Hz
• Thread: M18 x 1.5
• Resistance: 1.050 ± 100 Ohm
• Sensor signal: 2-pole insulated return
• Connector: AMP 2-pole pin 1.6mm